X1 Multi-functional Vehicle GPS Tracker
Pinpoint vehicles with this innovative X1 vehicle GPS tracker. Through easy-to-use platform, it provides you up-to-the-minute speed, location updates and various alerts and reports. Apart from functions like two-way talk, voice monitoring, X1 is also equipped with multiple interfaces for camera, LCD, RFID, etc. It is an invaluable tool for fleet management, logistics, car rental and buses.
Feature
GPS+GSM positioning
High accuracy GPS positioning with U-Blox chipset
RS232
Rich peripherial accessories supporting fuel level sensor, RFID reader, camera, etc
Two-way talk
With MIC and speaker, it realizes two-way communication
Multiple alarms & reports
Fuel cut-off/geo-fence alarm and direction change/mileage report, etc
1-Wire®
Interface for temperature sensors and i-Button driver ID
FOTA
Firmware upgrade using GPRS network
Internal 3-axis accelerometer
Driving behavior monitoring, power saving and motion detection
Bullt-in battery
Low power consumption and long standby with internal 600mAh battery
GSM Specification | |
---|---|
Communication system | GSM |
GSM module | SIMCOM800 |
GSM frequency | GSM 850/900/1800/1900MHz |
GPS module | U-blox7Q |
Location accuracy | <10 meters |
Tracking sensitivity | -161dBm |
Switch | 1 SOS Button, 1 power switch |
LED indicator | 3 LED lights indicating GPS/GSM/External power status |
Input voltage | DC 11~36V/1.5A |
Flash memory | 8MB ( GPRS data 20400 units, SMS data 700 units) |
Sensor | 3D accelerator sensor |
Operating temperature | -20℃ ~+70 ℃ |
Device weight | 160g |
Device dimension | 90×60×27mm |
TTFF (open sky) | Avg. hot start ≤1sec Avg. cold start ≤35sec |
Humidity | 5%~95% |
Battery | 600mAh/3.7V |
Internal Battery Life | 15 hours in sleep mode, and 6 hours in normal working mode |
Power consumption | 30-35mA standby current |
Max output | 4 Digital inputs - 1 negative input, 1 positive input, 2 custom input (Default 1 positive input, 1 negative input ) 2 Analog input AD2: 0~12V 2 Output 1 RS232 port (camera/RFID reader/ two-way calling) 1-Wire protocol (Temperature sensor/i-Button) 1 Impulse detection (Default speedometer detection) 1 USB port |